How Are Macadamia Nuts Sorted? A Guide from Dehusking to Kernel Grading

Macadamia processors use optical sorting and X-ray inspection at different points from dehusking to kernel grading. Optical sorters examine visible features such as residual husk, shell cracks and exposed kernel defects. X-ray systems examine structures inside the hard shell and can also support fat-content grading once the kernels have been released. The right inspection point depends on what is visible at that stage and where each sorted stream needs to go.

Five sorting stages in macadamia processing

Stage

What the system evaluates

What happens to the product

Post-dehusking sorting

Visible patches of residual husk

Nuts with residual husk can return for further dehusking

Nut-in-shell inspection

Shell appearance, internal kernel condition, shell thickness and kernel fullness

Nuts can be separated by the relevant external or internal criteria

Kernel sorting after cracking

Visible mold, insect damage and shell fragments

Defective kernels and visible shell fragments are removed from the kernel stream

Whole and half kernel sorting

Visible defects in separate whole- and half-kernel streams

Accepted kernels proceed to size grading

Kernel fat content analysis

Estimated fat content from dual-energy X-ray imaging

Kernels can be routed to configured fat-content grades

From the outer husk to the hard shell

The husk is the outer covering removed during dehusking. The hard shell remains around the kernel. If patches of husk remain, Techik’s AI Long Distance Optical Sorter can separate those nuts for another pass through dehusking. That makes this step a rework decision and allows the acceptable stream to continue downstream.

For nuts still in shell, Techik’s Quad View AI Optical Sorter examines visible shell surfaces for cracks, breakage and other appearance defects. Bulk X-ray inspection adds information about the kernel inside, including signs of shriveling or insect damage. Shell thickness and kernel fullness can also help processors select lots or streams for higher potential kernel recovery.

From cracking to finished kernel grades

Cracking exposes the kernel and can leave shell fragments in the product stream. A quad-view optical sorter examines the exposed material from multiple angles, targeting visible kernel defects and shell fragments in the same sorting stage.

Further downstream, whole kernels and halves can be inspected as separate streams before size grading. A whole-kernel stream and a half-kernel stream may have different acceptable shapes and product specifications, so processors can assess each on its own terms.

Where buyers or production teams specify a fat-content range, dual-energy X-ray imaging can support an additional grade. The system assesses individual kernels in line and routes them according to configured fat bands. The grade boundaries should be checked against reference measurements for the product being processed.

How does the product change along the line?

A harvested macadamia has three layers relevant to sorting: the outer husk, the hard shell and the edible kernel. Dehusking removes the outer layer and leaves a nut in shell. Cracking breaks the hard shell and releases the kernel. Each step changes what cameras can see and what the plant can do with a diverted nut.

For example, a nut with residual husk still contains a potentially usable kernel. Sending it back through the dehusker preserves that opportunity. After cracking, a loose piece of shell has no place in the accepted kernel stream. These two items may both be diverted by optical equipment, but their destinations and the checks used to evaluate the sorter are different.

How does the finished product determine the route?

A processor selling nuts in shell can use the first two stages to prepare the external shell and evaluate the condition of the enclosed kernel. The acceptance criteria may include both visible shell damage and internal quality. A processor selling shelled kernels may use the same early checks to guide raw material selection, then crack the accepted nuts and inspect the exposed kernels.

After cracking, a mixed stream may contain whole kernels, halves, smaller pieces and loose shell. Separating visible shell and defective kernels creates a cleaner feed for product grading. Once the style streams have been established, whole kernels and halves can be checked against their respective appearance specifications. Fat-content grading is an additional step for products that require a defined composition.

What should a processor measure at each stage?

The useful measure changes with the decision. After dehusking, measure residual husk in the accepted stream and inspect the returned nuts after another pass. Before cracking, compare X-ray classifications with what is found inside sampled nuts. After cracking, assess shell fragments that remain in the accepted stream and good kernels diverted with the rejects. At final grading, check each outlet against the specification assigned to it. Taken together, these checks show how decisions made early in the process affect the material available for downstream grades.

The same process map can also help a plant decide where to investigate a change in product quality.

Does every line need all five stages?

The configuration depends on what the plant sells and where defects or grading decisions occur. A nut-in-shell operation may focus on shell appearance and internal condition. A kernel supplier may give more attention to post-cracking sorting, whole and half streams, and fat grading. Techik can evaluate representative samples to identify which inspection stages match the plant’s products and specifications.


Post time: Nov-19-2026

Send your message to us:

Write your message here and send it to us