Quad Beam X-ray Inspection System for Bottles, Jars and Cans
*Introduction of Quad Beam X-ray Inspection System for Bottles, Jars and Cans:
There are different models of Techik X-ray Inspection System for Bottles, Jars and Cans, which can adapt to different production line and products, in order to detect and reject foreign matters in cand, bottle and jars. Techik has accumulated enough experience and customized equipment for food manufacturers.
*Parameter of Split Triple Beam X-ray Inspection System for Bottles, Jars and Cans:
| Model |
TXR-1626-JDU4/TXR-1626-JDM4 |
| X-ray Tube |
350W/480W Optional |
| Inspection Width |
160mm |
| Inspection Height |
260mm |
| Best Inspection Sensitivity |
Stainless steel ball Φ0.5mm Stainless steel wire Φ0.3*2mm Ceramic/Ceramic ball Φ1.5mm |
| Conveyor Speed |
10-120m/min |
| O/S |
Windows |
| Protection Method |
Protective tunnel |
| X-ray Leakage |
< 0.5 μSv/h |
| IP Rate |
IP65 |
| Working Environment |
Temperature: -10~40℃ |
|
Humidity:30~90%, no dew |
|
| Cooling Method |
Industrial air conditioning |
| Rejecter Mode |
Push rejecter/Piano key rejecter (optional) |
| Air Pressure |
0.8Mpa |
| Power Supply |
4.5kW |
| Main Material |
SUS304 |
| Surface Treatment |
Mirror polished/Sand blasted |
*Note
The technical parameter above namely is the result of sensitivity by inspecting only the test sample on the belt. The actual sensitivity would be affected according to the products being inspected.
*Packing
*Factory Tour
